31000-16-05-00-033-03-02

Bently Nevada 31000-16-05-00-033-03-02 Proximity Probe Housing Assembly

31000-16-05-00-033-03-02 is a PPS probe housing configured with a 3300 XL 8 mm probe, 0.5 m cable, no standoff adapter, 3.3 in probe penetration and the documented option-03 fitting kit. Every value below is tied to this complete ordering code and is not copied from a similar suffix.


	31000 English proximity probe housing assembly
	Glass-reinforced polyphenylene sulfide (PPS) with corrosion-resistant stainless-steel hardware
Probe option 16	3300 XL 8 mm probe
	0.5 m (20 in)

	3.3 in (approximately 84 mm)
Fittings option 03	Two plugs, one 3/4-14 NPT fitting, one 3/4-14 to 1/2-14 NPT stainless-steel reducer, and one cable-seal grip with three grommet ranges
Mounting thread option 02	3/4-14 NPT
	NEMA Type 4X and IP66 against hose-directed water
	1.2 kg (2.6 lb)
Recommended retaining-nut torque	29.4 N·m (260 in-lb)

✓

Mounting a proximity probe through the machine case for radial vibration or Keyphasor measurement.

✓

External probe-gap adjustment or probe replacement without disassembling the machine.

✓

Mechanically and environmentally protected 3300 XL 8 mm probe installations.

The standoff plus penetration dimension is 3.3 in; additional sleeve support is required only when that combined dimension is greater than 12 in (305 mm).

The housing provides mechanical and environmental protection but is not an explosion-proof housing; use the manufacturer-specified explosion-proof housing family where that rating is required.

The housing can be used in an intrinsically safe system only with an approved transducer system, appropriate barriers and the applicable installation drawing.

Confirm the cable-seal grommet range against the actual armored or unarmored probe cable outside diameter.

For accurate relative radial vibration, the machine casing must be affixed to the bearing.

The current manufacturer datasheet lists the 31000 housing ordering family and does not state a discontinuation date or universal direct successor for 31000-16-05-00-033-03-02.

31000-16-05-00-033-03-02

Its combined standoff and penetration dimension is 3.3 in. The manufacturer requires added support only when the combined dimension is greater than 12 in (305 mm).

31000-16-05-00-033-03-02?

Option 03 provides two plugs, one 3/4-14 npt fitting, one 3/4-14 to 1/2-14 npt stainless-steel reducer, and one cable-seal grip with three grommet ranges. Confirm the cable diameter and conduit routing.

31000-16-05-00-033-03-02 be used as an explosion-proof housing?

No. The 31000 housing is not explosion-proof; select the manufacturer-specified CA21000 or CA24701 family where an explosion-proof assembly is required.

31000-16-05-00-033-03-02?

Verify the 3300 XL 8 mm probe, 0.5 m (20 in) cable, no standoff adapter, 3.3 in (approximately 84 mm) penetration and 3/4-14 NPT mounting thread.

31000-16-05-00-033-03-02?

The reviewed current manufacturer datasheet gives no exact discontinuation date or universal substitute for this complete code.

31000-16-05-00-033-03-02. Hyphen placement, zero padding and every suffix field are significant; compare the full nameplate and purchase record before ordering.

Bently Nevada 31000 and 32000 Proximity Probe Housing Assemblies Datasheet, document 141610 Rev. R; 3300 XL 8 mm Proximity Transducer System Datasheet, document 141194.

www.plcleader.com

PLC Leader works with system integrators, distributors and industrial end users who need traceable automation and machinery-protection spare parts.

We review exact model identity, quantity, destination and technical verification needs so the quotation reflects the requested configuration rather than a similar suffix.

PLC Leader team supporting 31000-16-05-00-033-03-02 industrial product sourcing

These models are selected from reference lists supplied to PLC Leader and are shown for sourcing discovery only. They are not presented as direct replacements for the product described on this page. Confirm the complete manufacturer and part number before ordering.

220W000042-402	ABB RXSF1-110 RK 271016-AN	MU306A 451730
ULXP4	TA8DN11	74-115968-04
AC2458 2DI-Y 2DO	Fu5210	03031-2102-3113
IR33S0EN00	SHO100-T	RF5501-433EU UA352
K9403TR-03	B1 Rev A 001828H	TBS 50 15855
2CDG110027R0011	MCR-EX-SL-RTD-I-NC	BOB1024
4906GY	EXT-AUD-1000-CO	GE IC200MDL650K
MBS-1250 063G1781 0-300	PREMTB001	CCT56P008
LA3002	KA/D 0403.1	QM-RMCRX-BA
181737 RL28-55-LAS-2840/47/115b	1769-PA2	1SVR730824R9300
TA25DU25 1SAZ211201R1051	SS-MPPT-15L	GE CR104PLG92M
NP44 3HD/ILIGHT	CS1W-ID261	10P53520006
HEIE420318R3 XT375A-E	LUT-LBX-WH	Siemens TXS1.EF10
NC3MX-B	DCN-MICS-D	HDSP184K
Siemens 6RA2485-6GV62-0	I-7520 RS-232 RS-485	LC1D09BD
800xA AI810	2CDG 110 053 R0011	1PH8133-1MS12-0BB1
ABB 1SAP112100R0170 TB521-ETH	1606-XLP72E	Tonna 648132
SIGA-ST	HPE 764636‑B21 775418‑001	K1401M
HLM45V13MPD	AT-HDVS-150-RX	QUINT-ORING/24DC/2X10/1X20
Legrand 03687	ABB 83310-500	PLC‑BSP‑24DC/1/ACT

Populære tags: bently nevada 31000-16-05-00-033-03-02 proximity probe housing assembly, bently nevada 31000-16-05-00-033-03-02 proximity probe housing assembly manufacturers, suppliers